The Deburring Machine Is Simple And Easy To Operate

The deburring machine is a special equipment for removing the residual steel slag on the edge of the billet gas cutting line in the continuous casting machine production line. In the case where the billet is not stopped, Deburring Machine the burr is removed by the high speed rotary hammer knife. The equipment covers an area of not less than 900mm Can be installed for a variety of material slab of a cutting and secondary cutting.

The advantages of the deburring machine are as follows:

1, deburring machine can be batch to the workpiece deburring work, Deburring Machine to complete the deburring available after the screen batch and the needle completely separated, save working hours, improve work efficiency;

2, deburring machine for small hardware, small jewelry and other dead ends, the hole treatment effect is excellent. Can be achieved to remove dirt, remove the burr, improve product surface brightness, increase the observability and practicality of the workpiece;

3, deburring machine operation is simple and convenient, Deburring Machine one can operate multiple machines at the same time, cost savings;

4, deburring machine supplies for the polishing liquid and grinding steel needle, plus the amount of tap water to batch polishing to remove the workpiece burr work, no pollution to the environment.

Features are as follows:

1, automatic quick deburring, chamfering, polishing, Deburring Machine cleaning and other multiple effects;

2, irregular parts, holes, tubular and other dead ends, cracks, etc. can be polished to deburring;

3, can set the shutdown time, processing speed, safe operation;

4, adjustable frequency to meet a variety of workpiece deburring needs;

5, the end of the reminder to finish the work;

6, voltage, current, frequency, time can be monitored;

7, after grinding the workpiece is not deformed, does not damage the surface, Deburring Machine does not affect the accuracy;

8, low cost, fast, about 2-15 minutes to complete, simple operation, can be a multi-machine operation.